ABRIDGED DATA SHEET
ISO/IEC 14443 Type B-Compliant
Secure Memory
PROLOGUE FIELD
INFORMATION FIELD
EPILOGUE FIELD
PCB
1 BYTE
CID
1 BYTE
NAD
1 BYTE
(DATA)
0 OR MORE BYTES
CRC
(LSB)
1 BYTE
CRC
(MSB)
1 BYTE
Figure 11. ISO/IEC 14443-4 Type B Block Format
MSB
LSB
MSB
LSB
BIT 8
0
BIT 7
0
BIT 6
0
BIT 5
CH
BIT 4
CID
BIT 3
NAD
BIT 2
1
BIT 1
#
BIT 8
1
BIT 7
0
BIT 6
1
BIT 5
AN
BIT 4
CID
BIT 3
0
BIT 2
1
BIT 1
#
Figure 12. Bit Assignments for I-Block PCB
ISO/IEC 14443 Block
Transmission Protocol
Before the master can send a data packet to access the
memory, the MAX66040 must be in the ACTIVE state.
The protocol to put the MAX66040 into the ACTIVE state
is explained in the Network Function Commands sec-
tion. While in the ACTIVE state, the communication
between master and MAX66040 follows the block trans-
mission protocol as specified in Section 7 of ISO/IEC
14443-4. Such a block (Figure 11) consists of three
parts: the prologue field, the information field, and the
epilogue field. The prologue can contain up to 3 bytes,
called the protocol control byte (PCB), card identifier
(CID), and the node address (NAD). Epilogue is another
name for the 16-bit CRC that precedes the EOF. The
information field is the general location for data.
Block Types
The standard defines three types of blocks: I-block,
R-block, and S-block. Figures 12, 13, and 14 show the
applicable PCB bit assignments.
The I-block is the main tool to access the memory and
to run the SHA-1 engine. For I-blocks, bit 2 must be 1
and bit 6, bit 7, and bit 8 must be 0. Bit 5, marked as
CH, is used to indicate chaining, a function that is not
used or supported by the MAX66040. Therefore, bit 5
Figure 13. Bit Assignments for R-Block PCB
must always be 0. Bit 4, marked as CID, is used by the
master to indicate whether the prologue field contains a
CID byte. The MAX66040 processes blocks with and
without CID as defined in the standard. The master
must include the CID byte if bit 4 is 1. Bit 3, marked as
NAD, is used to indicate whether the prologue field
contains an NAD byte, a feature not supported by the
MAX66040. Therefore, bit 3 must always be 0. Bit 1,
marked as #, is the block number field. The block num-
ber is used to ensure that the response received relates
to the request sent. This function is important in the
error handling, which is illustrated in Annex B of
ISO/IEC 14443-4. The rules that govern the numbering
and handling of blocks are found in sections 7.5.3 and
7.5.4 of ISO/IEC 14443-4. The MAX66040 ignores
I-blocks that have bit 5 or bit 3 set to 1.
For R-blocks, the states of bit 2, bit 3, and bit 6, bit 7,
and bit 8 are fixed and must be transmitted as shown in
Figure 13. The function of bit 1 (block number) and bit 4
(CID indicator) is the same as for I-blocks. Bit 5,
marked as AN, is used to acknowledge (if transmitted
as 0) or not to acknowledge (if transmitted as 1) the
reception of the last frame for recovery from certain
error conditions. The MAX66040 fully supports the func-
tion of the R-block as defined in the standard. For
details and the applicable rules, refer to Sections 7.5.3
and 7.5.4 and Annex B of ISO/IEC 14443-4.
10
______________________________________________________________________________________
相关PDF资料
MAX6605MXK/V+T IC TEMP SENSOR ANLG LP SC70-5
MAX6608IUK+T IC TEMP SENSOR ANLG SOT23-5
MAX66100K-000AA+ IC RFID UID 64BIT TYPE B KEY FOB
MAX6611AUT+T IC TEMP SENS LOW PWR SOT23-6
MAX66120K-000AA+ IC RFID UID 1KB TYPEB MEM KEYFOB
MAX6612MXK+T IC TEMP SENSOR ANLG SC70-5
MAX6613MXK+TCA3 IC ANLG TEMP SENSOR SC70-5
MAX66140K-000AA+ IC RFID UID 64BIT TYPE B KEY FOB
相关代理商/技术参数
MAX66040K-00AA+ 制造商:Maxim Integrated Products 功能描述:ISO/IEC 14443 TYPE B-COMPLIANT SECURE MEMORY FOB - Rail/Tube
MAX6604AAHA+ 功能描述:板上安装温度传感器 Precision Temperature Monitor for DDR Memory Modules RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor
MAX6604AAHA+T 功能描述:板上安装温度传感器 NULL RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor
MAX6604AATA+ 制造商:Maxim Integrated Products 功能描述:PRECISION TEMPERATURE MONITOR FOR DDR MEMORY MODULES - Rail/Tube
MAX6604AATA+T 功能描述:板上安装温度传感器 Temperature Monitor for DDR Mem Module RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor
MAX6604AHA 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述:
MAX6604ATA 制造商:Maxim Integrated Products 功能描述:- Rail/Tube
MAX6604ATA+ 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述: